PVC Film

PVC film is a kind of vacuum plastic film, used for all kinds of panel surface packaging, so it is also known as decorative film, adhesive film, used in construction materials, packaging, medicine and many other industries. The construction materials industry accounts for the largest proportion of 60%, followed by the packaging industry, and a number of other industries with small applications.

We are capable to customize PVC film with different types and colors.

custom Service: Thickness 0.05mm to 0.5mm, Custom width and length

Send Inquiry To KUSLA

Typical Properties of PVC

	UNITS	ASTM TEST	PVC (RIGID)
Specific Gravity	–	D792	1.42
Tensile strength	psi	D638	7,500
Flexural modulus	psi	D790	481,000
Izod impact (notched)	ft-lbs/in of notch	D256	1
Heat deflection temperature @ 264 psi	°F	D648	158
Maximum continuous service temperature in air	°F		140
Water absorption (immersion 24 hours)	%	D570	0.06
Coefficient of linear thermal expansion	in/in/°Fx10-5	D696	3.2

Tips: Values may vary according to the brand name. please ask kusla experts for more detailed information

Choose PVC Film For Your Program

PVC cling film
PVC decorative film
High Insulation PVC Film
flexible PVC film
Colored PVC Film
clear PVC film
Adhesive PVC Film
PVC Film for Packaging
PVC film sheet
PVC protective film
PVC shrink film
PVC Silver Film
PVC stretch film
rigid PVC film
soft PVC film

Main Benefit Of PVC Film

Moisture and heat resistance: can be used in a humid environment of no more than 85 degrees.
Leading fashion suit: leading fashion color, meet personalized needs, for you and designers to create imagination space.
Non-toxic and pollution-free: raw materials are specially refined to remove toxic substances, and heavy metals are not used as stabilizers, so there is no pollution to the environment.
Scratch resistance, wear resistance: the surface of the film with a nail scratch without leaving traces, and the surface color is often scrubbed without change or fading.
No color difference, no discoloration: each time supply, the same product has the same color, surface effect and pattern. Molded door panels do not change color when used indoors for 20 years.
Good bottom coat: With this back coat, the door panels will not be glued for 10 to 20 years after the addition of two components of plastic.
Easy to form: the door panel treated with the film has a good three-dimensional sense, the film at the groove will not rebound, will not shrink, and the corner will not be red.
Easy to purify: the surface of the film will not produce static electricity during the scrubbing process, and it is not easy to adhere to the dust. Immediately remove oil stains from surfaces with regular detergent within 12 hours.

Frequently Asked Questions

Kusla could supply a minimum thickness of 0.02mm PVC film

Usually use Up-blowing (air-cooled) up-expanding hot water process:

PVC raw material mixing → Extruded plasticizing → extruded upward

Tube billet → tube billet blowing expansion → thick film air cooling → drafting → hot bath heating → thick film blowing expansion → cold water jacket cooling → traction → rolling

PVC film could be used for making swimming rings, toys, rain shoes, tablecloths, decorative film, tape and so on. soft PVC film, mainly used in advertising film, tablecloth, leather and so on; Hard PVC film, can be used for sheets and other hard products, Semi-rigid PVC film, mainly used in floor film, furniture decoration film and so on

It depends on the material brand and grade, also film size, Kusla PVC film provides you with a very affordable price in the market.

The hue of the fully transparent PET protective film is different. The hue of the fully transparent PET protective film is lighter, while the hue of PVC is darker.

The flammability is not the same. PET protective film can be incinerated after igniting, while PVC is not so easy to ignite

Raw materials are different, PET protective film raw materials are more environmental protection, but PVC material has environmental standards, does not surely protect the environment

The feeling of touch is different, PET protective film can be electrostatic adsorption, containing a little viscosity, but PVC protective film is very good viscosity, rubbing by hand is not easy to fall down, and its material is harder than PET protective film.

Other PVC Material

PVC Film

PVC Film PVC film is a kind of vacuum plastic film, used for all kinds of panel surface packaging, so it is also known as decorative film, adhesive film, used in construction materials, packaging, medicine and many other industries. The construction materials industry accounts for the largest proportion of 60%, followed by the packaging industry,…
Learn More
PVC Pipe

PVC Pipe PVC pipe is a type of plastic pipe made from polyvinyl chloride (PVC), a synthetic polymer of chlorine and ethylene. PVC pipe is rigid and strong, but can be made more flexible by adding plasticizers. PVC pipe is widely used in construction, plumbing, electrical insulation, and other applications because it is low-cost, durable, and resistant to corrosion….
Learn More
PVC Rod

PVC Rod PVC rod is a type of plastic rod made from polyvinyl chloride, a polymer of vinyl chloride. It is a versatile thermoplastic that has excellent strength-to-weight ratio and flame resistance, coupled with its low cost. It is used extensively in all walks of life, from food packaging, to home construction, to tanks and chemical-processing applications. …
Learn More
PVC Sheet

PVC sheet PVC sheet is made of PVC raw materials, its section is honeycomb mesh structure. it is a kind of vacuum blister film. Used for the surface packaging of all kinds of panels, so it is also known as decorative film, adhesive film, used in building materials, packaging, medicine and many other industries. Among…
Learn More