PVC sheet

PVC sheet is made of PVC raw materials, its section is honeycomb mesh structure. it is a kind of vacuum blister film. Used for the surface packaging of all kinds of panels, so it is also known as decorative film, adhesive film, used in building materials, packaging, medicine and many other industries. Among them, the building materials industry accounts for the largest proportion of 60%, followed by packaging industry, there are a number of other small applications of the industry. PVS sheets could be classified as flexible PVC sheet, solid PVC sheet, PVC skin foam sheet, PVC free foam sheets, Clear PVC sheets, and Opaque PVC sheets.

Kusla supply customed PVC sheets with different types, sizes and colors

Send Inquiry To KUSLA

PVC sheet Specification

Thickness  DimensionsGRADESTYPES AND COLORS
0.062 in – 4 in12 in x 12 in – 60 in x 120 inType 1, Type 2, CPVC, Gray, White, Clear

Length, width, thickness, and diameter tolerances vary by size, by manufacturer, brand, and grade.
Custom sizes and colors are available upon request.

Typical Properties of PVC

UNITSASTM TESTPVC (RIGID)
Specific Gravity-D7921.42
Tensile strengthpsiD6387,500
Flexural moduluspsiD790481,000
Izod impact (notched)ft-lbs/in of notchD2561
Heat deflection temperature @ 264 psi°FD648158
Maximum continuous service temperature in air°F140
Water absorption (immersion 24 hours)%D5700.06
Coefficient of linear thermal expansionin/in/°Fx10-5D6963.2

Tips: Values may vary according to the brand name. please ask kusla experts for more detailed information

Main Benefit Of PVC Sheets

  • lightweight, convenient handling and loading: PVC material is very light, handling, loading and unloading, construction is convenient, save labor.
  • Excellent chemical resistance: PVC sheet has excellent acid, alkali and corrosion resistance, which is suitable for chemical industry applications.
  • Small flow resistance: The wall surface of PVC pipe is smooth, the fluid resistance is small, its roughness coefficient is only 0, 009, lower than other pipes, and the pipe diameter can be reduced under the same flow rate.
  • High mechanical strength: The strength of water pressure resistance, external pressure resistance and impact resistance of PVC sheet is very high, which is suitable for piping engineering under various conditions.
  • Good electrical insulation: PVC has excellent electrical insulation performance, suitable for wire, cable protection sleeve.
  • Do not affect the water quality: PVC pipe and fittings are proved to be the best pipes for piping tap water without affecting water quality by dissolution experiment.

Frequently Asked Questions about PVC sheets

PVC sheets are a type of plastic sheet made from polyvinyl chloride (PVC). They are known for their durability and toughness, as well as their resistance to chemicals, acids, weather and abrasion. PVC sheets can be machined and tooled into a vast variety of shapes and components. They are strong yet relatively lightweight, affordable and widely available.

Some of the most significant properties of Polyvinyl Chloride (PVC) are:

1.Density: PVC is very dense compared to most plastics (specific gravity around 1.4).
2.Economics: PVC is readily available and cheap.
3.Hardness: Rigid PVC ranks well for hardness and durability.
4.Strength: Rigid PVC has excellent tensile strength.


PVC sheeting features high-impact strength and resistance to most industrial chemicals. This versatile plastic offers excellent thermal and sound insulation, so it absorbs vibrations and oscillations. PVC plastic sheets are also easy to fabricate, glue, paint, and screen print.

PVC plastic sheets are a polar polymer, which has a strong affinity for conducting materials such as water, so its resistance is smaller than that of non-polar polyolefins, but it still has a higher volume negative and breakdown voltage. The polar groups of the polyvinyl chloride are attached directly to the backbone.

In summary, PVC sheets are known for their durability and toughness, as well as their resistance to chemicals, acids, weather and abrasion. They can be machined and tooled into a vast variety of shapes and components. They are strong yet relatively lightweight, affordable and widely available. PVC sheets also offer excellent thermal and sound insulation properties.

Extruded PVC sheets are available in thicknesses ranging from 1mm to 50mm. The sheet sizes are 2000 x 1000mm, 2440 x 1220mm, and 3000 x 1500mm. Larger sheets and non-standard sheet sizes are available subject to minimum order quantities.

PVC plastic sheets come in a variety of colors including gray, white, and other custom colors.

The density of PVC sheets is up to 150 g/cm³ which is about 150 times the density of water.

The hardness of PVC sheets is measured on the Shore D scale and ranges from 55-85.

PVC sheets have a maximum temperature resistance of 140°F.

PVC sheets are highly resistant to corrosion and weathering. They are also resistant to most acids, alkalis, and salts.

PVC sheets are self-extinguishing and have a fire rating of UL 94 V-0 which is the highest rating for flammability.

PVC sheets can be machined into a variety of shapes such as flat sheetstubesrods, and profiles. They can also be cut into custom shapes using a variety of cutting methods such as laser cuttingwaterjet cutting, and CNC routing.

PVC sheets are used in a variety of applications such as chemical processing tanksvalvesfittings and piping systems. They are also used in crafts, modeling, and cosplay props.

Here is a list of some common applications for PVC sheets:

Food and Beverage Preparation and Processing
Gaskets and Seals
Semiconductor and Electronics
Tank Construction
Thermoformers
Valves and Fittings
Graphics and Signage
Furniture and Outdoor Living
Advertising and Display
Building and Construction
Marine
Healthcare
Kitchens, Bedrooms and Bathrooms
Agriculture and Planting

The cost of PVC sheets can vary depending on factors such as size, thickness, and color. For example, a typical price for a Foam PVC Sheet is $25 but can range from approximately $5 to $56.Here are some examples of the cost of PVC sheets:

A 1/8" x 12" x 12" White PVC Sheet costs $4.32.
A 1/8" x 24" x 48" White PVC Sheet costs $34.21.
A 1/4" x 48" x 96" White PVC Sheet costs $256.25.

Other PVC Material

  • PVC Film

    PVC Film PVC film is a kind of vacuum plastic film, used for all kinds of panel surface packaging, so it is also known as decorative film, adhesive film, used in construction materials, packaging, medicine and many other industries. The construction materials industry accounts for the largest proportion of 60%, followed by the packaging industry,...

    Learn More

  • PVC Pipe

    PVC Pipe PVC pipe is a type of plastic pipe made from polyvinyl chloride (PVC), a synthetic polymer of chlorine and ethylene. PVC pipe is rigid and strong, but can be made more flexible by adding plasticizers. PVC pipe is widely used in construction, plumbing, electrical insulation, and other applications because it is low-cost, durable, and resistant to corrosion....

    Learn More

  • PVC Rod

    PVC Rod PVC rod is a type of plastic rod made from polyvinyl chloride, a polymer of vinyl chloride. It is a versatile thermoplastic that has excellent strength-to-weight ratio and flame resistance, coupled with its low cost. It is used extensively in all walks of life, from food packaging, to home construction, to tanks and chemical-processing applications. ...

    Learn More